The Art of Masonry

Brick masonry is not only a question of building physics, building construction and durability, i.e. sustainability, but has much to do with aesthetics and making sense, which may have been forgotten in modern architecture with its absolute lack of décor. Masonry as an art form has been scarce since the era of brick expressionism. Recently, there have been some exceptions – and thoroughly welcome. The ”Fjordenhus“ in Vejle, Denmark, is an astonishing example.     

Multi-field coupling thermo-acoustic radiation using free-standing nano-thin films in a static magnetic field

Abstract

Thermo-acoustic radiation from nano-thin film has been widely reported these years. In this paper, a static magnetic field is introduced to enhance the acoustic power in the multi-field thermo-acoustic generation. The coupled thermo-acoustic system in a static magnetic field shares the same acoustical unit with very few additional components. In the presence of a static magnetic field, thin-film vibration is excited instead of being still in the classical thermo-acoustic system. Not surprisingly, a steady magnetic field has very little impact on the thermo-acoustic generation system when a constant amplitude sinusoidal current is introduced. The oscillation perpendicular to the nano-thin film is driven by the electromagnetic force. The system response of thermo-acoustics and magneto-acoustics can be generally matched when suitable parameters are introduced. The acoustical pressure output can be significantly improved in the presence of a static magnetic field although more electrical input power should be provided in the multi-field thermo-acoustic system. Evidently, the coupled multi-field acoustical system is able to handle more electrical power input and the power input can be more easily dissipated relatively. The results show that the acoustic response of this new multi-filed coupled system can be significantly improved as compared to the classical system without magnetic effects.     

转底炉处理赤泥工艺技术

为了综合利用氧化铝冶炼产生的赤泥，探索在转底炉中直接还原赤泥、磨矿磁选获得高品位直接还原铁。通过实验室试验摸索了转底炉还原工艺参数，并在转底炉工业试验线进行了工业试验。实验室结果表明，赤泥还原后的直接还原铁(DRI)金属化率可达88.6%，磁选后的铁品位可达82.1%，磁选后的铁回收率可达88.9%。工业试验中，转底炉还原后，产品金属化率平均为69.2%，将还原后的DRI磁选获得高品位的DRI产品，磁选后DRI的铁品位为72.8%，磁选后铁回收率达到了85.2%,初步打通了在转底炉中还原赤泥、磁选的工艺路径。     

Hierarchical Coherent Phonons in a Superatomic Semiconductor

The coupling of phonons to electrons and other phonons plays a defining role in material properties, such as charge and energy transport, light emission, and superconductivity. In atomic solids, phonons are delocalized over the 3D lattice, in contrast to molecular solids where localized vibrations dominate. Here, a hierarchical semiconductor that expands the phonon space by combining localized 0D modes with delocalized 2D and 3D modes is described. This material consists of superatomic building blocks (Re₆Se₈) covalently linked into 2D sheets that are stacked into a layered van der Waals lattice. Using transient reflectance spectroscopy, three types of coherent phonons are identified: localized 0D breathing modes of isolated superatom, 2D synchronized twisting of superatoms in layers, and 3D acoustic interlayer deformation. These phonons are coupled to the electronic degrees of freedom to varying extents. The presence of local phonon modes in an extended crystal opens the door to controlling material properties from hierarchical phonon engineering.     

有色冶炼二次含砷物料碱法脱砷工艺现状

分析了典型二次含砷物料化学成分特点,概括了当前有色冶炼工业中产生的二次含砷物料碱法脱砷工艺及原理,主要包括湿法脱砷工艺和火法—湿法联合脱砷工艺。其中,碱法脱砷工艺常用NaOH单碱浸出、NaOH-Na_2S混合碱浸出和NaOH+Na_2S混合碱两段浸出三种体系,并采用双氧水、加压、曝气、微波、球磨等氧化手段强化砷的浸出;火法—湿法联合脱砷工艺主要有低温碱性熔炼—水浸、焙烧预氧化—碱性浸出以及低温碱性焙烧—热水浸出工艺,低温碱性焙烧—热水浸出工艺选择性脱砷效果好,物料普适性广。最后,结合现有研究指出了碱法脱砷工艺存在的问题及二次含砷物料无害化、资源化研究方向。     

电磁场作用下球形磁极辅助研磨弯管内表面研究

弯管弯曲成形后,在弯折处易产生微裂纹、褶皱等表面质量缺陷问题。本文通过采用六自由度机械手拖动电磁场发生装置沿加工轨迹往复运动,电磁场发生装置驱动球形辅助磁极绕管件内壁转动,实现了对弯管内表面的光整加工。在此基础上,通过对弯管轮廓采集及曲线拟合,重新构建了弯管中心线并转换为新的研磨加工轨迹。采用超景深3D电子显微镜和触针式表面粗糙度测量仪对研磨试验前后弯管内表面的形貌和粗糙度进行了对比分析。结果表明,通过重新构建研磨加工轨迹,试验装置有效解决了研磨弯折处的干涉与研磨不均匀等问题。研磨55 min后,表面粗糙度由原始的0.713μm降低到0.194μm,铜合金弯管内表面原始质量缺陷基本去除,表面纹理较为致密均匀。该方法有效避免了未规划研磨轨迹时出现的犁耕等纹理缺陷,提高了弯管的服役可靠性。     

液晶显示器用有机高分子材料的老化与评价方法研究

通过对液晶显示器用有机高分子材料的老化机理分析,研究了胶带和胶黏剂分别在材料贮存期间和使用期间的主要应力及其薄弱环节。提出了在有机高分子材料不同的使用阶段相应的老化试验方案和失效评价指标,并给出了相应的试验验证过程,为液晶显示器用有机高分子材料的寿命评估提供了支持。     

频率可调太赫兹回旋振荡管互作用电路的设计与研究

根据动态核极化核磁共振成像技术对回旋振荡管的要求,设计了130 GHz 回旋振荡管的注波互作用电路,基于线性理论对互作用电路进行了研究并选择了合适的工作点,分析了电路的频率调节特性。利用相对论电子回旋脉塞非线性理论对互作用系统进行了模拟和计算,优化了工作参数,计算了磁场及电子注参数对输出功率及效率的影响。最后,用粒子模拟方法进行了模拟并与非线性理论结果进行了比较,两者符合得很好。模拟结果显示,当电压为10 kV、电流为0.3 A、磁场强度由2.34 T 增加到2.41 T 时,输出功率由1310 W 减小到230 W,对应的效率分别为43.6%和7.7%,振荡管的频率可调范围约为2.7 GHz。     

磁絮凝强化技术处理厌氧消化污泥脱水液

为满足后续生物处理单元对固体悬浮物（SS）和铁浓度的进水要求，采用磁絮凝强化技术对厌氧消化污泥脱水液进行预处理。通过正交试验和单因素试验，本文考察了混凝水力条件、聚合氯化铝（PAC）投加量、聚丙烯酰胺（PAM）投加量、磁粉投加量及药剂投加顺序对磁絮凝效果的影响。试验结果表明：磁絮凝强化技术在快搅300r/min（2min）、慢搅100r/min（15min）、静置10min时，依次投加磁粉（40mg/L）、PAC（30mg/L）、PAM（4mg/L）时处理效果最好。在此运行条件下，SS和Fe³⁺去除率分别为97.61%、98.24%、絮凝指数（FI值）取得最大值、zeta电位绝对值最小，絮凝效果最佳。与对照相比，磁絮凝强化技术对SS和Fe³⁺去除率分别可提高3.70%和10.82%，同时絮体最大沉降速度可提高33%。磁絮凝技术处理后的出水不仅可以满足后续生物处理单元对SS和铁浓度的要求，还可以有效提高磁絮凝体的沉降速度，减小沉淀时间，具有较好的实用价值。